This can have several causes.
- Notifications only work if a micro SD card is inserted (the capacity of this SD card must be at least 8 Gb and at most 128 Gb)
- Please check if UPnP is enabled in your router. This can be found in the settings of your router. This option can be found differently for each router (see the picture below as an example).
- If you have multiple routers installed in your house, you need to set the camera to the Wifi signal/channel of the first router in your network. This is the first router that is connected to the Internet cable that goes into your house.
- If you connect the camera to an additional router, wifi amplifier, or similar device, the notifications may not work.